HEADLIGHTS CORRECTOR
Manual adjustment
The headlight beam angle adjustment works
only when the ignition is turned on (ON position) and
headlights, and is designed to adjust the tilt
headlight beams according to loading conditions
car.
If the vehicle is not carrying heavy loads and
the bill moves along a horizontal road, set the
lator to position 0.
If the number of passengers and cargo/luggage in the vehicle
changes, the direction of the headlight beams may be
higher than normal.
In this case, the headlights may have a blinding effect on
drivers of oncoming and passing cars, especially
when driving on hilly terrain.
To ensure the correct tilt of the light beams
headlights, turn the switch to the appropriate position
tion. The larger number on the switch scale corresponds to
greater inclination of the light beam.
Reflection sensor
automatic shutdown systems
high beam headlight is located in front of the interior mirror
rear view. To ensure proper functioning
automatic high beam switching off system
headlights, observe the following recommendations:
Always keep your windshield clean.
Do not attach stickers (including those made of transparent material)
rial) and do not install additional equipment
near the reflection sensor.
Do not hit the reflection sensor or damage it.
surfaces around it. Do not touch the sensor lens
reflections.
If the reflection sensor is damaged as a result of a collision,
repair, contact an authorized dealer service station.
ra NISSAN.
Daytime running light system
Daytime running lights turn on after starting the engine
even if the headlight switch is in the position
position.
When you turn the headlight switch to the position
The low beam headlights turn off.
To enable the automatic shutdown system
high beam headlights, set the headlight switch to
AUTO position
and move the lever forward
switching on the high beam). After turning on the headlights
the dashboard indicator will light up
to turn off the high beam headlights.
If, when performing these actions, the indicator is
systems for automatically switching off high beam headlights are not
lights up, this may indicate a system malfunction.
Contact an authorized dealer's service station
NISSAN to check and repair the system.
When the vehicle speed decreases below the
at approximately 25 km/h it becomes impossible to turn on the high beams
possible.
To disable the automatic shutdown system
high beam headlights install the headlight switch
to position
or turn on the low beam by setting
lever to the middle position.
Reflective Sensor Maintenance
Dashboard and governing bodies
Select the switch position according to the table below.
Second row seats
Position
switch
Number of passengers
fat on the front
seats
Quantity
passengers on
rear seats
Mechanical
Transmission
Mechanical
Transmission
Mechanical
Transmission
No passengers
No load
102 kg (225 lb)
170 kg (375 lb)
No passengers
305 kg (673 lb)
365 kg (805 lb)
436 kg (961 lb)
Third row seats
Position
switch
Number of passengers
fat on the front
seats
Number of passengers
on the seats of the second
Number of passengers
fat on the seats
third row
Weight of baggage in luggage compartment (APPROX kg (lbs))
Manual Transmission
Manual Transmission
No passengers
No passengers
No load
No passengers or 3
137 kg (302 lb)
142 kg (313 lb)
141 kg (311 lb)
No passengers
No passengers
524 kg (1,155 lb)
525 kg (1,158 lb)
Instrument panel and controls
TURN SIGNAL SWITCH
Type A
Type B
ATTENTION
The turn signal switch lever will not return to
neutral position if the steering angle is
sa will not reach a certain value. After execution
when turning or changing lanes, make sure that
The turn signal is off.
Headlight washers operate when the headlights are on and
proper ignition.
To turn on the headlight washers:
Press the headlight washer switch (for some
Pull the windshield washer lever towards you.
The headlight washer operates simultaneously with the washer
windshield body. This function is activated
every time you turn the ignition off or on
or headlight switch.
After the first operation, the headlight washer will
work simultaneously with every fifth switch-on
I eat windshield washer.
See section "Window wiper/washer switch"
later in this chapter.
ATTENTION
Do not turn on the windshield washer when the reservoir is
There is no washer fluid.
Automatic adjustment
The headlights have an automatic angle adjustment function
clone of the light beam. Adjusting the angle of the light
beam occurs automatically.
DISCHARGE PREVENTION SYSTEM
BATTERY
Sound indicator of not switched off lighting turns on
is detected if the driver's door is open while the
The headlight switch is in the
And the ignition switch is in the OFF position
If the ignition switch is turned to the OFF position
or LOCK when the headlight switch is in position
marriage
Discharge prevention function
battery will turn off the lights after
opening the driver's door.
HEADLIGHT WASHER (for some variants)
vehicle performance)
Headlight washer switch (for some versions)
car)
Instrument panel and controls
FOG SWITCH
PAR
To turn off the fog lights, return the switch
set the fog lights to position
REAR FOG LAMP
The rear fog light must be used
only in conditions of limited visibility (in general
less than 100 m).
To turn on the rear fog lamp, install
turn the headlight switch to position
The rear fog light and indicator will turn on
If the fog lights (for some variants are used)
car full) are already included in the position
headlight switch, then you can turn on the rear
fog lamp without first switching
headlight switch to position
or position
AUTO (for some vehicle versions).
To turn off the rear fog light, return
fog light switch to position
FOGLAMPS (for some
vehicle options)
Type A
Type B
To turn on the fog lights, turn the
headlight switch to position
(for some vehicle options), and then
turn the fog light switch to the position
tion
The fog lights and indicator will turn on
on the instrument panel. Fog switch
headlights will automatically return to position
Turn indicator
To turn on the turn signal, move the lever up
before fixation. After completing the turn
The turn indicators are automatically turned off.
Signaling a lane change
To turn on the lane change signal, press
lever up
until they start
turn indicators flash.
If immediately after this the lever is moved in the opposite direction,
control, the direction indicators will flash three times.
To turn off the blinking indicators, move the lever to
the opposite direction.
I hereby give my unconditional consent to Nissan Manufacturing RUS LLC (hereinafter referred to as the Company, location: Russian Federation, 194362 St. Petersburg, pos. Pargolovo, Komendantsky Ave., 140) to process my personal data indicated above (hereinafter referred to as PD) freely, of my own free will and in my own interest on the following conditions. PD processing is carried out for the purposes of: delivery of ordered goods, after-sales service of goods, notification of service and recall campaigns; monitoring sales and customer service; storage in information systems to optimize processes of interaction with customers; technical support of information systems; statistical and analytical purposes; conducting marketing research. This consent is provided to carry out any actions in relation to my PD that are necessary or desirable to achieve the above purposes, including (without limitation) collection, systematization, accumulation, storage, clarification (updating, changing), use, distribution (including transfer to third parties), depersonalization, blocking, destruction, cross-border transfer of personal data in any form, as well as carrying out any other actions with my personal data, taking into account the legislation of the Russian Federation. The processing of the above PD is carried out through mixed processing (without the use of automation tools and with the use of such tools), and is carried out both in PD information systems and outside such information systems. I hereby confirm that, for the above purposes, I consent to the Company transferring my PD to third parties (processors), including, but not limited to: Nissan group companies, authorized dealers (Nissan, Infiniti, Datsun), as well as organizations with which the Company interacts on the basis of relevant contracts (agreements). I hereby confirm that I have been notified that I may request from the Company up-to-date information about third parties (name or surname, first name, patronymic and address of the person) to whom my PD is transferred.
This consent is valid for 25 years from the date of its receipt. You are also notified that in accordance with Article 9 of the Federal Law of July 27, 2006 No. 152-FZ “On Personal Data”, this consent can be revoked by sending a written notification to the Company by registered mail with a list of attachments to the address: 194362, St. Petersburg, pos. Pargolovo, Komendantsky Prospekt, 140, or delivery in person against signature to authorized representatives of the Company.
You hereby express your unconditional consent to Nissan Manufacturing RUS LLC (hereinafter referred to as the “Company”) to the processing of the above personal data with and without the use of automation tools, including their transfer, including cross-border, to Nissan group companies, authorized dealers (Nissan, Infiniti, Datsun), as well as organizations with which the Company interacts on the basis of relevant contracts (agreements), for the following purposes: delivery of ordered goods, after-sales service of goods, notification of service and recall campaigns; monitoring sales and customer service; storage in information systems to optimize processes of interaction with customers; technical support of information systems; statistical and analytical purposes; conducting marketing research. This consent is valid for 25 years from the date of its receipt. You are also notified that in accordance with Article 9 of the Federal Law of July 27, 2006 No. 152-FZ “On Personal Data”, this consent can be revoked by sending a written notification to the Company by registered mail with a list of attachments to the address: 194362, St. Petersburg, Pargolovo village, Komendantsky Prospekt, 140, or delivery in person against signature to authorized representatives of the Company.
You also hereby confirm that you agree to receive information about goods, services and events via means of communication (Internet, SMS, phone calls, mail).
CAR MODIFICATION
It is prohibited to make any changes to the design of the vehicle. This can lead to
to the deterioration operational properties vehicle, reducing its safety or long-term
eternity. In some cases, a change in the design of the car may cause a violation
knowledge of current state standards and rules. In addition, any damage
or deterioration in vehicle performance caused by modifications,
NISSAN's warranty does not apply.
FOR YOUR SAFETY - BEFORE OPERATION
VEHICLE, PLEASE READ THIS MANUAL
Before operating your vehicle, please read this manual carefully.
manual. This will allow you to learn the controls of the car, get acquainted
with maintenance requirements and will ultimately provide
safe operation your car.
In the text of this manual, to visually highlight hazard warnings
The following icons are used:
DANGER
This heading is used in cases where there is a real risk of injury.
injury to people or damage to the vehicle. To avoid injury or death
The instructions given must be strictly followed.
ATTENTION
This header indicates a warning about dangerous situations, which may
result in minor or moderate injury or damage to vehicle parts.
To avoid such risks or to significantly reduce them, it is necessary to strictly follow
the given instructions.
NOTE
This heading indicates additional useful information.
IMPORTANT SAFETY INFORMATION
SAFE DRIVING RULES!
Always follow the important rules below. This will ensure for you and your pas-
passengers maximum safety while the vehicle is moving.
NEVER drive a car while under the influence of alcohol.
nia or under the influence of drugs.
ALWAYS obey posted speed limits road signs, and neither-
when do not exceed the speed that is safe for specific driving conditions.
ALWAYS wear your seat belt. When transporting children in a car, use
Use appropriate child restraint systems. Young children are allowed
be transported only using child restraint systems installed
on back seat car.
ALWAYS instruct all vehicle occupants on the proper use of
of the safety systems that the vehicle is equipped with.
Please review this Guide REGULARLY to refresh your memory of important information.
education about safe driving.
COMMENT
This Owner's Manual contains information for vehicles with different
configuration options. Therefore, you can find in the Manual a description of the equipment
tion that is missing on your car.
Description of the car, specifications and illustrations given in the Manual
product correspond to the state of the product at the date of publication. NISSAN leaves
reserves the right to make changes to the design or technical specifications at any time
vehicle stickers without prior notice and without any obligation from your
sides.
Preface
Welcome to the growing family of owners NISSAN cars. The company has complete confidence in the car you purchased. It was manufactured using the most sophisticated
temporary technologies with the strictest adherence to quality.
This Manual has been prepared to help you understand the structure of your vehicle and how to maintain it, so that many kilometers spent behind the wheel
this car brought you joy. We strongly recommend that you read this Manual before operating the vehicle.
A separate Warranty Booklet provides detailed information on the terms and contents of the manufacturer's warranty obligations that apply to your vehicle.
An authorized NISSAN dealer knows your vehicle better than anyone else. When your car needs some Maintenance or repair, or in case
you have any questions related to your car, official dealer will be happy to help you and will use all the means at his disposal to do this.
Basic illustrations
SAFETY – SEATS, SEAT BELTS AND ADDITIONAL RESTRAINTS
SYSTEMS
1. Front airbags (page 1-30)
2. Seat belts (page 1-10)
3. Headrests (p. 1-8)
4. Curtain airbags (page 1-30)
5. Place of attachment of the upper strap for child restraints
systems* (p. 1-15)
6. Front seats (p. 1-2)
7. Side airbags (page 1-30)
8. Pyrotechnic seat belt pretensioners
9. Second row seats (pages 1-5)
Installing child restraint systems (page 1-15)
10. Installation of ISOFIX child restraint systems (on si-
days of the second row) (p. 1-22)
11. Place of attachment of the upper strap for child restraints
systems (p. 1-23)
12. Third row seats* (p. 1-7)
Basic illustrations
7. Camera forward view* (p. 4-6)
8. Tow hook (p. 6-13)
9. Headlight and turn signal switch (p. 2-35)
10. Fog lights* (p. 2-40)
11. Parking assistance sensors* (p. 5-49)
Wheels and tires (p. 8-32, 9-7)
1. Hood (p. 3-21)
2. Windshield cleaner and washer
Switch (page 2-41)
3. Headlight washer* (p. 2-39)
4. Anterior chamber* (p. 2-33, 4-6, 5-36)
5. Roof ventilation hatch* (p. 2-47)
6. Electric windows (p. 2-45)
FRONT VIEW OF THE CAR
Replacing a damaged wheel (page 6-2)
Tire Information Label (page 9-9)
13. Exterior rear view mirrors (p. 3-28)
14. Side view camera* (p. 4-6)
15. Side turn signal repeater (p. 2-39)
Keys (p. 3-2)
Door locks (p. 3-4)
System remote control locks*
Security system (p. 3-18)
*: For some vehicle variants
Basic illustrations
9. Rear combination lamp (p. 8-24)
10. Filler hatch fuel tank(p. 3-26)
11. Locking the rear passenger door locks from
sneaking out of the car (p. 3-6)
*: For some vehicle variants
5. Roof rack* (p. 2-55)
6. Parking assistance sensors* (p. 5-49)
Parking Assist (PA)* (page 4-14)
7. Rear fog lamp (p. 2-40)
8. Door luggage compartment(p. 3-22)
Intelligent Key* System (page 3-9)
Remote locking system* (p. 3-6)
Rear view camera (page 4-6)
1. Electric heater rear window(p. 2-44)
2. Rear window cleaner and washer
Switch (page 2-43)
Windshield washer fluid (page 8-16)
3. High brake light
Replacing lamps (page 8-25)
4. Antenna (p. 4-37)
REAR OF THE CAR