Correspondence with an expert:
- Comment on the product "Power steering pump": Product: used. Wear percentage: 0%
- Comments on the product "Manual transmission (manual gearbox)": Product: used
- Comment on the product “gearbox in a block with a drive axle (restored)”: new restored
- Comment on the product "F-Power Steering Pump With pulley O78mm 5PK, 90-100 B": I recommend
- Driver's door lock, maybe it's not original?
- Unfortunately, there are no annals
- Good afternoon! Seller selected Door lock LH lane Fu selected independently Qty. Amount and date FORD/1372469 Original RUR 2,840
- what is the difference from the driver’s door lock, the cost is 11,780 rubles.
- the question is what is the difference between this lock and art. 1372469, the price is noticeably different, what’s the catch?
- Hello, the proposed lock options are selected in the original catalog according to VIN number Your car.
- Perhaps such a difference in price will depend on different configurations car and, accordingly, different locks.
- Your option With a central system. locking, With remote control unit opening doors
- Thanks for clarifying
- Please, I was glad to help.
- Comment on the product "Fusion/Fiesta Power steering pump 1.4-1.6 with air conditioning (small pulley)": Refurbished
- Comment on the product "Power steering pump Ford Fiesta 2001-2007, Ford Fusion 2002-,Mazda 2 2003-2007 rebuild": Rebuilt
- Comment on the product "FUSION AC power steering pump without pulley": without pulley
- Comment on the product "Power steering pump Ford Fusion Fiesta analogue with pulley P0705A": Analogue
- Hello. Please check that the VIN is correct.
- WF0UXXGAJU8A36204
- Thank you.
- Faithful now?
- Yes, it is recognized now.
- Do you have the original used?
- MSG and REIKANEN restored.
- That is, used, but rebuilt using new seals and worn parts.
- From car disassembly
- There is no such.
- Comment on the product "Power steering pump with pulley? 78mm 5PK, 90-100 Bar FORD Fiesta V, Fusion 1.3-1.6, 01-": Belarus, recommend
- Commentary on the product "RESTORED GU PUMP FORDFIESTA2001-2007, FORD": Russia
- Hello, what is the price for the cable if it is correct?
- I need a Ford Fusion
- Engine 1.4
- Hello! What kind of cable, hood, etc. Please clarify
- My car has a power steering pump and a cable that are not original. When this hose burst, the oil all leaked out, I ordered it, but it didn’t fit; they ordered the pump from another car. I need everything included, both the pump and the hose
- Of course, I don’t understand this, I just don’t even have anyone to ask
- So, regarding the pump, I recommend Fenox, although it is made in Belarus, but the components and technologies are not ours. Applicability table - FORD model FUSION (JU_) station wagon 1.4 petrol 80 hp 08.2002 - engine FXJA, FXJB, FXJC.
- Photo sent
- Now the hose, as I understand it, you need a high pressure hose. And you keep talking about the cable, did you mean to say hose? I'll pick up the hoses, but a little later.
- Another question, how did they explain to you why they burst, old age, frayed...
- Yes, it was never changed, it burst
- That is, as they say *dried up*. just old age. I understand, I'll pick up the hoses. I will definitely answer, but a little later
- Fine
- I just can’t see how much this pump costs from the photo
- The description in the list of spare parts selection shows 3 options
- In the photo, select the numbers of the hoses you need, it will be easier
- Hello! this is all ?
- are there any other analogues?
- yes that's all
- Thank you!
- Please
- Uploaded a picture
- New picture
- Power steering pump assembly (with pulley, 6 “streams”) for vehicles with air conditioning, 1.4 volume, 80 hp.
- are you ready to pay 15,000 for a pulley?
- .... found a cheaper option..
- your right
- art:1357617, brand:FORD. Select spare parts for the client according to the standard request processing procedure and answer his question.
- Thank you very much
- does the analogue have a pulley?
- good day, yes there is
- Andrey, good evening! I would like to additional information about the power steering hose, is it really a return line? The one that comes out of the steering rack
- Good evening. Yes, this is the return.
- the non-original is much worse in quality? What do you advise?
- Hose and hose, I would take a non-original one. What happened to your old one?
- crumbled at the entrance to the rail, the pump spun without fluid, and also whistled
- Clear. In this case, just change it.
- It’s composite, tubes and hoses, but it’s unlikely that the ending is somewhere separate. By the way, are the pumps with or without pulleys? If not, can you repress the old one?
- Composite is a hose, not a pump)
- a pump without a pulley, you have to take it from an old one.
- for the product REIKANEN - Power steering pump Ford Fusion, Fiesta V 01- 1.4 TDCi pulley 126mm origin.reb a discount of RUB 1,110.00 was provided. New price RUR 9,990.00
- for the product DP-GROUP - PG pump Ford Fiesta, Fusion 1.4TDCI 03 - a discount of 1,158.00 rubles was provided. New price 10,422.00 rub.
- for the FORD product - Power Steering Pump Fu (diesel) a discount of RUB 3,166.00 was provided. New price 17,944.00 rub.
- 1 495 688 - number of the pump with pulley. You can't bring it through the VIN code. its price starts from 18,000
- for your position, I chose the option offered by Ford itself - it’s called a restored one without a pulley. it's essentially a new working pump, just cheaper
- if the price is too high, look for a used one at a ferio or eurocar showroom
- for 8960 rub. without pulley
- Power steering pump and belt
- Do you need a pump with a pulley or without it?
- With pulley
- added without a pulley, with a pulley and the pulley itself
- added replacement kit drive belts, includes two belts and a tool to change them
- devices
Every modern car equipped with hydraulic (power steering) or electric power steering (EPS). This simplified driving and allowed even ladies to drive big cars, which is called "one hand". In turn, power steering imposes certain obligations on their owners, namely the need to regularly monitor the condition of the power steering fluid, as well as to replace it timely replacement after the car has traveled a certain distance. Why didn’t I mention the power steering, because unlike the power steering, they practically do not require maintenance; the force is produced by a small motor that runs on electricity and does its job properly regardless of the car’s mileage. I will not go into detail and talk about what is better or worse, instead I propose to talk about something more important - about how to change power steering fluid on a Ford Fusion at home.
7. After you disconnect the fitting, water will flow from both hoses. old power steering fluid. Install the container and drain the waste.
8. Afterwards, you need to carefully plug the hole in the hose that goes to the tank with something; for this you can use a plug of a suitable diameter or a piece of some rag.
9. We proceed differently with the second end of the hose; it must be lowered into a container, because through it we will drain the remaining old power steering fluid.
10. Take a clean one power steering fluid and fill to the "MAX" mark.
11. We ask your partner to sit behind the wheel and turn the steering wheel left and right. You must turn the steering wheel smoothly and without jerking - all the way to the right, then all the way to the left. From such manipulations, the old oil will be squeezed out and poured into the prepared container, and the new oil that you poured into the tank will replace the old one. Your task is to monitor what kind of oil flows out of the hose and to ensure that there is always power steering fluid in the tank. Add fluid until clean power steering fluid flows from the hose, that is, the one you are pouring.
12. When the old fluid has been drained and clean fluid flows from the hose, connect the fitting to the hoses and attach it back to the casing.
Many Ford Fusion owners have experienced a humming sound in the power steering. Usually the fault lies in the power steering pump. Let's try to figure out how to replace this element without resorting to the help of a car service.
Video material
The video will tell you how to quickly and efficiently change the power steering pump with your own hands, as well as the intricacies and nuances of the process.
Replacement process
Before you begin the replacement process itself, it is worth considering the causes and signs of a part failure. If there is a knocking and creaking sound in the area of the power steering pump, it means that the shaft is deformed; also an indirect sign is that the belt is worn out on one side.
The replacement process is quite simple. So let's get started:
- Remove the negative terminal of the battery.
- Unscrew and remove the front right wheel.
- We dismantle the drive pump. It is usually recommended to replace it together with the belt, since it often has to be cut.
- We dismantle the power steering injection hose.
- Disconnect the suction hose from the pump nozzle.
- Unscrew the four bolts securing the power steering pump and remove it from the car.
Installing a new pump is carried out in the reverse order.
Part selection
The original catalog number of the Ford Fusion power steering pump is 1357617. The average cost is 40,000 rubles.
Analogs
Except original part There are a number of analogues that can be used and they are in no way inferior in quality. So, let's look at the list of similar spare parts for the Ford Fusion: 
Conclusion
Replacing the Ford Fusion power steering pump is not difficult, but it will require some effort since you also have to change the belt. Special attention It is worth paying attention to the choice of product, since fakes are often found on the auto parts market.
Many Ford Fusion owners have experienced a humming sound in the power steering. Often, this means it's time to change the power steering pump. This material will tell you how to perform the operation yourself.
Video material
The video will tell you how to quickly and efficiently change the power steering pump with your own hands, as well as the intricacies and nuances of the process.
Before you begin the replacement process itself, it is worth considering the causes and signs of a part failure.
The replacement process is quite simple. So let's get started:
- We remove the battery terminal to avoid trouble.
- Unscrew and remove the front right wheel.
- We dismantle the drive pump. It is usually recommended to replace it together with the belt, since it often has to be cut.
- We dismantle the power steering injection hose.
The belt has been removed!
- Disconnect the suction hose from the pump nozzle.
Hose location.
- Unscrew the four bolts securing the power steering pump and remove it from the car.
- Installing a new pump is carried out in the reverse order.
Ready! All that's left is to put on the belt.
vendor code
- Original catalog number of the Ford Fusion power steering pump – 1357617 .
- The price is 35 000 rubles
Analogs
In addition to the original part, there are a number of analogues that can be used and are in no way inferior in quality. So, let's look at the list of similar spare parts for the Ford Fusion:
| Manufacturer | Catalog number | Price |
|---|---|---|
| Ford | 1227887 | 25000 |
| Ford | 1363849 | 25000 |
| MSG | FO010 | 10 000 |
| Lizarte | 04.05.1242 | 12000 |
| Reikanen | P0705Y | 15000 |
| BGA | PSP2340 | 15000 |
| Reikanen | P0705 | 15000 |
| Meyle | 7146310027 | 15000 |
| JP Group | 1545101100 | 17000 |
| Motorherz | P1229HG | 17000 |
| TRW | JPR395 | 25000 |
conclusions
Changing the power steering pump on a Ford Fusion is not difficult, but it will require effort, since you also have to change the belt. Particular attention should be paid to the choice of product, since fakes are often found on the auto parts market.
Currently, it is difficult to find a car without a hydraulic power steering (power steering) system. The system provides for filling with a special hydraulic fluid, in Ford Fusion vehicles this is usually ATF or Dextron.
Manufacturers will almost always recommend replacement power steering fluid, only original production, but, as practice shows, this is not at all necessary, the main thing is that the fluid meets the specified tolerances.
To top up or complete replacement fluid in the power steering system Ford car Use only Fusion that has been filled or within factory recommended tolerances. Periodically it is necessary to check the power steering fluid level and, if necessary, top it up to the required level.
How to change the power steering fluid on a Ford Fusion yourself?
- Fix the position of the car using the lever hand brake. Under rear wheels vehicle place wheel chocks.
- Open the hood of the car.
- Use a jack and lift the front of the vehicle so that the wheels are in the air.
- Unscrew the filler cap on the power steering fluid reservoir.
- Lower the crankcase protection, if your vehicle has one, or remove the plastic protective cover.
- Next, either proceed to remove the power steering reservoir, or on the right side, near the wheel, you will see a power steering return hose attached to the drive belt casing. You need to find the quick-release fitting on it and carefully remove it. To do this, you will need to unfasten the rubber hose clips from the casing, then press two buttons on the fitting and pull as hard as you can in different directions. If you cannot remove the fitting by hand, use pliers with curved noses.
- Place previously prepared empty containers under the ends of the hose, because after successfully disconnecting the fitting, old used power steering fluid will pour out from both sides of the hose.
- Next, plug the hole in the hose from the side that approaches the plastic tank, use a clean cloth or a special plug.
- Place the other end of the hose in a container; it will be needed to drain old fluid from the steering rack. Place the container.
- Fill the power steering reservoir with new fluid to the maximum mark, you can even add a little more.
- Next, you will need the help of a partner, let him sit behind the wheel and start turning it. If there is no one next to you, and you perform the procedure completely independently, then you can avoid boarding the salon. You can rotate the raised wheels with your hands and at this moment observe the flowing liquid. Turn steering wheel from the cabin you need to use your hands from one extreme position to the other.
- With such actions, the used power steering fluid will be drained into the prepared container, and clean fluid will be supplied from the tank, filling the steering rack.
- Simultaneously with the pumping process, you should add new power steering fluid to the reservoir; this will help prevent air from entering the system and save you from unnecessary work.
- Merge old fluid necessary until the clean water that has just been poured into the tank flows out of the hose, new fluid Power steering
- Connect the fitting and secure the hose back to the casing with clips.
- Fill the reservoir with hydraulic fluid to the maximum level.
- Start the car engine and start turning the steering wheel from the far right to the far left. Do this action several times.
- Turn off the engine of your vehicle and look at the fluid level in the reservoir. Top up or pump out, depending on what the situation requires.
- Finally, reassemble all the removed parts in reverse order.
- Lower the front of the car and you can drive a little, make sure that everything is in order, there are no leaks in the system, and there is enough fluid.
As a rule, in the operating instructions and in the manual book for the Ford Fusion there is an inscription that informs that replacing the hydraulic fluid for the power steering is not provided. But as practice shows, there are some indications in which it is simply necessary to replace it. The power steering fluid must be replaced if:
- It has changed its color, usually becoming darker.
- She changed the smell, the liquid began to smell like burning.
- Your hands are itching and you want to replace something in your car.
Important!
The power steering pump should not be allowed to operate without fluid; this will immediately damage it, which can lead to costly repairs.
When you bleed the system, draining the remaining waste fluid, the steering wheel should be rotated smoothly, without jerking, with the utmost care and without applying excessive force.
When changing the oil, if you do not turn the steering wheel and do not expel the old dirty oil from the steering rack, then it will remain in the cavities of the mechanism; new oil will never enter there because the new fluid will be discharged directly by the torsion spool connected to the steering shaft in the opposite direction.